Renault Klub Slovenija Forum

malo potrpljenja no, saj bo

ce ti kaj pomaga tako pise v dialogysu:

COOLING

filling:

-check the drain plug/s are tight
-open the bleed screew/s
-fill the circuit through the expansion bottle
-unclip the hose from the top of the computer and position it below the expansion bottle
-close the bleed screw/s as soon as the liquid runs out in a continous jet
-start the engine (1500rpm)
-adjust the overflow level for 4 minutes approximately
-close the bottle

bleeding:

-let the engine run for 10 minutes at 1500rpm un til the engine cooling fan operates. (time required for automatic de-gassing)
-check the coolant level is near the "max" mark


NEVER OPEN THE BLEED SCREWS WHEN THE ENGINE IS RUNNING
REPLACE THE EXPANSION BOTTLE CAP WHEN THE ENGINE IS WARM

Shusuglao napisal/-a:ce ti kaj pomaga tako pise v dialogysu:

COOLING

filling:

-check the drain plug/s are tight
-open the bleed screew/s
-fill the circuit through the expansion bottle
-unclip the hose from the top of the computer and position it below the expansion bottle
-close the bleed screw/s as soon as the liquid runs out in a continous jet
-start the engine (1500rpm)
-adjust the overflow level for 4 minutes approximately
-close the bottle

bleeding:

-let the engine run for 10 minutes at 1500rpm un til the engine cooling fan operates. (time required for automatic de-gassing)
-check the coolant level is near the "max" mark


NEVER OPEN THE BLEED SCREWS WHEN THE ENGINE IS RUNNING
REPLACE THE EXPANSION BOTTLE CAP WHEN THE ENGINE IS WARM

Tistle COMPUTER mi ni lih jasn kaj nej bi bil?

piki napisal/-a:mam isti avto, sem samo posteno opral pecko in greje k sus.
pol ure dela to je to!

LPP

Sej jest sm jo tud sprau pa mi ne greje k sus pa bi blo dobr ce bi:(!

R5Gt turbo napisal/-a:
Tistle COMPUTER mi ni lih jasn kaj nej bi bil?

najbrz je cev kje blizu racunalnika